Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

   

Press release
24.04.2025  |  59x
Share this item
Daniela Wieland, engineer at Netze BW, explains how the mixing system works, where hydrogen is mixed with natural gas.

Innovative project with VEGA technology: heating with hydrogen

Heating with hydrogen mixtures via existing natural gas pipelines is feasible. Supported by precision instrumentation from VEGA
How can excess renewable electricity be stored and used sensibly? One possible answer to this question was provided by the groundbreaking project “NETZlabor Hydrogen Island Öhringen” – supported by precision instrumentation from VEGA.

One promising approach to storing surplus electricity is to use it to produce hydrogen, which can be delivered as a fuel gas for heating systems. But is the utilisation of hydrogen or natural gas-hydrogen mixtures via existing gas pipelines technically feasible? A large-scale test carried out on the Netze BW site in Öhringen has provided much more clarity in answering this research question. Hydrogen produced in a Hydrogenics electrolyser was mixed with natural gas and distributed through the existing pipeline network.

High-precision measurements

The high-precision VEGA measurement technology played a key role here: Sensors like VEGABAR 82, equipped with robust ceramic measuring cells, monitored the pressure and flow rate of the hydrogen. This technology guarantees both the safety and the efficiency of the system.

Only minimal effort

“The project showed that existing gas infrastructures can be adapted to operation with hydrogen with little cost and effort,” explains project engineer Daniela Wieland. It also provided important insights into the behaviour of hydrogen mixtures in pipes and as a fuel gas.

Consequential findings

One key achievement of the project: The tests proved that a hydrogen and natural gas mixture can be used to heat buildings with no problem. The “NETZlabor Hydrogen Island Öhringen” is thus paving the way for the sustainable use of renewable energies and a step-by-step development of the hydrogen economy. Findings from this groundbreaking project could point the way for the energy transition and the future utilisation of existing gas infrastructures.

Company information

More items

VEGA member of the Single Pair Ethernet Alliance Partnership in the future of automation to offer customers the best possible digital networking and simple integration into digital infrastructures
VEGA member of the Single Pair Ethernet Alliance
Partnership in the future of automation to offer customers the best possible digital networking and simple integration into digital infrastructures Today, more process data is available to industry than ever before. This brings many advantages, because digital networking makes production processes more transparent and scalable. To be able to offer customers the best possible networking as well as simple integration into digital infrastructures, instrumentation manufacturer VEGA is now participating in the Single Pair Ethernet Alliance. Single Pair Ethernet In the process industry, the networking of machines and production systems in the sense of Industry 4.0 is in full swing. A situation that has made it clear that data transfer must start to move in a new direction. That’s why VEGA, the global manufacturer of level and pressure measurement technology, has been involved in the SPE Alliance, an association of leading technology companies, since the end of 2024: founded in 2020 with the stated goal of creating a standardised, seamless network architecture based on Single Pair Ethernet, or SPE for short. Customers
24.04.2025  |  029x  |  Press release  | 
VEGA sensors are heading into the future with RFID tags To make it possible to identify a sensor at any time and in any place, even if its type label is damaged or faded VEGA is making RFID tags available for its sensors
VEGA sensors are heading into the future with RFID tags
To make it possible to identify a sensor at any time and in any place, even if its type label is damaged or faded VEGA is making RFID tags available for its sensors Scratches, dents or worn areas: After years of reliable performance under diverse environmental conditions and temperatures, even a level sensor shows its age. To make it possible to identify a sensor at any time and in any place, even if its type label is damaged or faded, and trace it using every digit of the serial number, VEGA is making RFID tags available for its sensors, initially for those of the PRO series. RFID Tags RFID (Radio Frequency Identification) is not new, but it is now probably the most advanced way of identifying sensors in industrial facilities. RFID tags contain a microchip that stores information. Because their robust chips make them contactlessly readable for many years, despite wind and weather, rapid temperature changes or exposure to sunlight, they are far superior to other labelling techniques. “They are an ideal addition to stamped tags or barcodes, especially for outdoor installations,” says Stefan Kaspar, VEGA product manager.
16.09.2024  |  885x  |  Product news  | 
VEGA participates in chip start-up Instrumentation manufacturer co-develops high-frequency ASICs
VEGA participates in chip start-up
Instrumentation manufacturer co-develops high-frequency ASICs Tiny, powerful and crucial for quality: ASICs (Application-Specific Integrated Circuits), i.e. integrated circuits developed to meet specific requirements, are the basis for the success of a radar sensor. The start-up milli IC in Karlsruhe specialises in the development of such high-frequency ASICs – and VEGA Grieshaber KG is on board with this venture. A wealth of expertise in millimetre wave and high-frequency technology The two managing directors Esref Turkmen and Alexander Haag as well as KIT professor and advisor Ahmet Cagri Ulusoy, three top experts in the field of millimetre wave and high-frequency technology, have joined forces. VEGA is the fourth partner involved and, as a successful manufacturer of measurement technology for level and pressure, not only contributes a great deal of expertise in this field, but also specific areas of application for the microchips. Helping to shape technological progress As a world market leader, VEGA already has
22.08.2024  |  836x  |  Press release  | 
VEGAPULS 6X:  High precision despite high temperatures The VEGAPULS 6X radar sensor in the new high-temperature version offers a solution for processes with temperatures of up to 450 °C.
VEGAPULS 6X: High precision despite high temperatures
The VEGAPULS 6X radar sensor in the new high-temperature version offers a solution for processes with temperatures of up to 450 °C. There are applications that push level measurement to its limits. Until recently, this included a process called iron briquetting, where it was almost impossible to achieve reliable measuring results due to extreme temperatures. That has changed. Now, the new high-temperature version of radar sensor VEGAPULS 6X provides a groundbreaking solution for processes at temperatures up to 450 °C. Sponge iron is an intermediate product in steel production. To store or transport it economically, it is often processed into briquettes. The technique involves passing the porous, spongy mass through heat-resistant roller presses at temperatures of 400 °C and higher. New solution for an old problem For many years, precise level measurement was the bottleneck in this process. Conventional measurement technology was not able to function reliably under the harsh conditions, because in addition to the heat, the low conductivity of iron also proved to be an impediment. For challenging
04.06.2024  |  962x  |  Product news  | 
PORTALS
Recycling-Portal Schuettgut-Portal BulkSolids-Portal
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising
FOLLOW US
Linked