The Fritsch variable Speed Rotor Mill Pulverisette 14 premium line offers impact, shearing and cutting comminution in one instrument – with a higher performance, better cooling and significantly quieter than comparable instruments. Its powerful motor is ideal for the particularly fast comminution of soft to medium-hard, brittle as well as fibrous materials and temperature-sensitive samples with an extremely fast sample throughput, which can be further increased by the use of the Fritsch cyclone separators.
Overview of the features:
- Powerful grinding with 22,000 rpm for particularly fast sample throughput
- Max. feed size < 15 mm, sample throughput of up to 15 l/h and more
- AutoLOCK grinding chamber for particularly safe work
- Final fineness down to d50 < 40 μm, sieve rings 0.08 – 6 mm
- Particularly good cooling of the grinding material
- Pleasantly quiet operation
- Very easy to clean due to Clean Design
FRITSCH premium-Plus: Two instruments in one
With the cutting rotor you turn the Variable Speed Rotor Mill Pulverisette 14 premium line into a Cutting Mill for fast, efficient pre- and fine comminution of soft to hard-tough, fibrous materials and plastics.
FRITSCH premium-Plus: Quiet operation according to DIN EN
A high-speed motor with ceramic bearings ensures a particularly high impact and rotor speed with an extra powerful 22,000 rpm. Your advantage: finer results in shorter times.
FRITSCH premium-Plus: Significantly better cooling
The new Pulverisette 14 premium line cools your sample during grinding significantly better than comparable instruments.
Your advantage: melting or sticking of the grinding material is greatly reduced, even with temperature-sensitive samples.
FRITSCH premium-Plus: Incredibly safe operation
The Intelligence-Safety-Control-System automatically checks the components of the grinding set – labyrinth disk for impact or cutting rotor, collecting vessel with lid – for completeness and correct insertion. Even the Fritsch vibratory Feeder Laborette 24 is detected by the programme. The grinding starts only when all the parts are fully and correctly inserted and the instruments lid is properly locked.
FRITSCH premium-Plus: Fast, residue-free cleaning
The well-conceived Clean Design covers all the areas, which make the cleaning of your mill as easy as possible: All the surfaces are designed to be extremely dirt-resistant and easy to clean. And all the parts that need regular cleaning can be removed with a single motion without tools. Furthermore the innovative laser welding of the sieve rings enables due to less dead spaces a significantly easier cleaning, as well as greater stability and longer service life.
