COMPANY PAGE

Fire prevention including extinguishing system for recycling according EN 54-10 or VdS: For more safety and insurance cover thanks to certified fire protection. The increased number of fires in recycling not only causes enormous damage and, in the worst case, plant closures. It has also led insurers to define stricter requirements for fire protection. The new system from T&B for the early detection of potential fire risks based on an infrared camera meets today’s enormously increased requirements for preventive fire protection in plants - as a reliable solution in accordance with the applicable standards and regulations. Choose the system in the version that suits your business. Depending on your processes and the requirements of your insurance company, you will receive the camera with the required certification: either certified according the VdS or the EN 54-10. It is therefore suitable for realising standard-compliant systems for fire prevention in installations. Depending on the operator’s requirements, it is possible to control an extinguishing system and connect to fire alarm systems or fire brigade control

T&B presents a smart system for the early detection of fire hazards caused by lithium-ion batteries in small warehouses. This enables operators to take measures for safety and damage limitation at an early stage. The handling and storage of lithium-ion batteries or accumulators is increasingly an issue for recycling companies and for manufacturers who are obliged to take back accumulators. Gases and aerosols can escape from pre-damaged accumulators - signs of an impending thermal runaway of the accumulators. More than a conventional CO detector The Fire Gas and Smoke Detection System (FGSDS) detects both smoke and a wide variety of fire gases long before the thermal runaway. The system is based on a special gas detector that detects different fire gases at an early stage. In combination with smoke detection, the FGSDS provides comprehensive early detection. Freely adjustable threshold values allow the system to be adapted to the operator’s individual safety requirements. Thanks to the smart combination of detectors and air intake, only one detector is needed to monitor the entire interior of a small warehouse. This also simplifies installation and use: the system can

For the detection of sparks and embers as well as for the prevention of fire spreading, T&B electronic presents the detectors suitable for these risks. In order to prevent fires and explosions in filters, conveyors, silos, coolers, mills, pellet mills or dryers comprehensively and reliably, individually customized solutions are required. Each of the fire risks in the different plant areas can only be controlled with the most suitable detector. FSM multichannel detector For plant areas in which both sparks and embers can form, T&B electronic GmbH is presenting its FSM multichannel detector at the trade fair in Dortmund. This detector, certified by VdS Schadenverhütung GmbH, detects both sparks and embers. Previously, a specific detector was required for each. If this combination detector is used in areas where sparks and embers are present, the cost of installation and maintenance is reduced - with the same functionality and safety. Hot particles Plant operators can invest this saving in fire protection for downstream processes into which hot particles can be introduced. The FST-lt hot particle detector from

For the first time, T&B is preparing a certified protection concept in cooperation with VdS The drying of materials is often the prerequisite for their further processing. The drying process, i.e. the thermal removal of water and other liquids, makes the dried goods durable, mixable, grindable or otherwise usable for further process steps. Drying processes have been industrial standard for many decades already. The first belt dryer in Europe, for example, went into operation as long ago as 1907. These days, belt dryers are used in a wide range of different branches. Examples include belt dryers for timber, pharmaceuticals, food, plastics, wastewater sludge and many other organic substances. All these substances have one thing in common: they are combustible and, in combination with a belt dryer, result in a high fire load. The importance of belt dryers in industrial applications has increased significantly over the past few years. Generally, standard series belt dryers have a modular design. They are made up of a product feeding module, a drying module